D Master – D Master

WHAT HAVE WE DONE TO DATE?

DIFFERENT PRODUCT TYPES

YEARS OF EXPERIENCE

PRODUCT ORDERS

DEALERS

EMPLOYEES

CITIES

ABOUT US

SAFAK MAKİNA YedekParcaSan. ve Tic. A.S. was founded in İstanbulin 1955 by Mr. FethiCATALAY. The production,which started in 1955 with a single turning machine, further expanded and developed in 1979when the second generation took the helm with DundarCATALAY, SerdarCATALAY and ErdalCATALAY. In 1998, SAFAK MAKINA A.S. relocated to its new premises built over 10.500 m2 indoor space in Samandira, Istanbul and thus became an integrated plant. The factory with 24.000 m2of indoor spaceat organized industrial zonein Duzce,is under construction.

ABOUT US

Announcements & News

Mechanical Tests The Right Material

In the production of DMaster implants, the highest quality pure titanium Grade 4 rods are obtained by cold drawing method which is the ideal metal processing method. Accurate Material and...

Mechanical Tests The Right Material

In the production of DMaster implants, the highest quality pure titanium Grade 4 rods are obtained by cold drawing method which is the ideal metal processing method. Accurate Material and...

Product Groups

Quality

60 YEARS OF EXPERIENCE

In accordance with customer expectations, D Master has made investments and continues to do so by increasing its measurement capability.

First Quality in Production

Expanding its expert staff and our company in direct proportion to the investment in hardware offers the highest quality machines on the market in Turkey.

Zero Error Principle

There are approximately 500 measuring and control devices to perform other measurements and controls at various stages of production.

Research & Development

Our company attaches great importance to Research and Development activities in accordance with the increasing competition conditions in our country and in the world.

Engineering Studies

Our engineering department has successfully implemented many projects by keeping the customer requests in the forefront.

Logistics Support

The daily analyzes of all customer production lines are performed and planned purchase and related production and shipments are carried out successfully.

Our Products

01.02.2019

Aesthetical Healing Cap

Healing Cap Based on the fact that proper soft tissue healing plays a key part in the success of implant-reinforced dentures, Dmaster implant system aims to provide all options for you to create the appropriate and optimal gum output profile on the area to be restored. Therefore,gum healing pieces are...

01.02.2019

Surgical Sets and Specifications

Surgical Set is made available to the physician by also including the additional accessories that could be needed during a surgical operation. The burs (drills) in the set comprising 51 pieces are fitted with a stopper, allowing for a safe and comfortable operation. Special tools in the set enable manual...

16.09.2018

Implant Impressions

Condensed silicone, polyvinylsiloxane and polyether impression materials are used in dental implant application. The key feature in impressionmaterials is the surface energy and the second feature is the habit. Substances with a high surface energy and narrow wetting angle get in contact with water. In this case, it determines the...

16.09.2018

Anchorage Specifications

DMASTER Implant isspecifically designed to eliminate the losses of abutment, due to the loosening of the screw in the long term. The implant anchoragepart is designed in a conical form and therefore the parts used in the superstructure are designed according to this conical structure. In this way, DMASTERprevents the...

16.09.2018

Morphological Structure

DMASTER creates a broader bone integration thanks to its special geometrical structure. It provides primary stability during the surgical procedure thanks to its non-aggressive groove structure. It reduces the stress in cortical bone thanks to its delicate groove structure and accelerates osseointegration. Contraction performed at the end of the neck...

16.09.2018

Surface Structure

CELLTex® CELLTex® surface, macro and micro structure are roughened by way of abrasion with corundum which is one of the hardest minerals in the world and then it is cleaned with double acidifying to obtain an extended surface. The topographic surface formed has anosteoconductivefeature, which enhances the osseointegration success of...

16.09.2018

Areas of Application

The implant is the artificial tooth roots that are placed in the jawbone, to serve instead of the missing teeth. They are usually made of titanium and are produced using the state-of-the-art technologies. Titanium is a metal that has been used safely in many areas of medicine for centuries because...

16.09.2018

Drilling Procedure

DMASTER Implant is specifically designed to eliminate the losses of abutment, due to the loosening of the screw in the long term. The implant anchoragepart is designed in a conical form and therefore the parts used in the superstructure are designed according to this conical structure. In this way, DMASTERprevents...

16.09.2018

Unpacking Procedure

Unpacking Procedure Thedouble-layerpackagingprovides a longshelf life totheimplant sterilized with gamma ray method. It is safeduring transport. It provides comfort and practicaluse in surgicaloperation.

16.09.2018

Soft Tissue Aesthetics

Abutment Design Targeting Perfect Soft Tissue Continuity; Current research results reveals that soft tissue continuity in the implant neck is critical for maintaining long-term bone support and gingival thickness around the abutment should be higher than the natural teeth for the continuity of soft tissue. The abutment of the DMaster...

16.09.2018

Impression Transfer Parts

Dmaster implant systemoffers impression transfer parts suitable for all impression techniques, for the transfer of implant positions to any size and model. In addition to the screwedtransfer pieces suitable for closed tray technique and open tray technique,“snap-on” type impression transfer parts, enabling self-locking when seated, are available to get practical...

16.09.2018

Temporary Abutment

The Dmaster implant system also introduces a range of temporary abutments having the same profile as the healing caps, in accordance with the philosophy of creating the optimal outlet profile. Manufactured from biocompatible and high-strength PEEK (polyether ether ketone) material, temporary abutments are suitable for immediate loading procedure, and used...

Gallery

Blog Articles

20.03.2019

Mechanical Tests The Right Material

In the production of DMaster implants, the highest quality pure titanium Grade 4 rods are obtained by cold drawing method which is the ideal metal processing method. Accurate Material and High Strength; In the production of DMaster implants, the highest quality pure titanium Grade 4 rods are obtained by cold...